unisonic technologies co., ltd dtd123y npn silicon transistor www.unisonic.com.tw 1 of 3 copyright ? 2005 unisonic technologies co., ltd qw-r206-087,a digital transistors (built-in resistors) features * built-in bias resistors that implies easy on/off applications. * the bias resistors are thin-film re sistors with complete isolation to allow negative input. equivalent circuit out gnd r 1 r 2 in gnd out in sot-23 3 2 1 sot-323 3 2 1 *pb-free plating product number: dtd123yl ordering information order number pin assignment normal lead free plating package 1 2 3 packing dtd123y-ae3 r dtd123yl-ae3-r sot-23 g i o tape reel dtd123y-al3 r dtd123yl-al3 r sot-323 g i o tape reel note: g: gnd i: input o: output dtd123yl-ae3-r (1)packing type (2)package type (3)lead plating (1) r: tape reel (2) ae3: sot-23, al3: sot-323 (3) l: lead free plating, blank: pb/sn marking dc3y
dtd123y npn silicon transistor unisonic technologies co., ltd 2 of 3 www.unisonic.com.tw qw-r206-087,a absolute maximum rating (ta=25
) parameter symbol ratings unit supply voltage v cc 50 v input voltage v in -5 ~ +12 v output current i c 500 ma power dissipation p d 200 mw junction temperature t j +150
storage temperature t stg -55 ~ +150
note absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings onl y and functional device operat ion is not implied. electrical characteristics (ta=25
) parameter symbol test conditions min typ max unit v in(off) v cc =5v, i out =100a 0.3 input voltage v in(on) v out =0.3v, i out =20ma 2 v output voltage v out(on) i o /i i =50ma/2.5ma 0.1 0.3 v input current i in v in =5v 3.6 ma output current i o(off) v cc =50v, v in =0v 0.5 a dc current gain h fe v out =5v, i out =50ma 56 input resistance r 1 1.54 2.2 2.86 k ? resistance ratio r 2 /r 1 3.6 4.5 5.5 transition frequency f t v ce =10v, i e = ? 50ma, f=100mhz * 200 mhz * transition frequency of the device
dtd123y npn silicon transistor unisonic technologies co., ltd 3 of 3 www.unisonic.com.tw qw-r206-087,a typical characteristics ta=-40 25 100 fig.1 input voltage vs. output current (on characteristics) output current, i out (ma) 0.5 1 2 5 10 20 50 100 200 500 100m 200m 500m 1 2 5 10 20 50 100 input voltage, v in(o n) (v) v out =0.3v v cc =5v ta=100 25 -40 0 0.5 1.0 1.5 2.0 2.5 3.0 0.001 0.002 0.005 0.01 0.02 0.05 0. 1 0. 2 0. 5 1 2 5 10 input voltage, v i(off) (v) fig.2 output current vs. input voltage (off characteristics) output current, i out (ma) ta=100 25 -40 v out =5v 0. 5 1 2 5 10 20 50 100 200 500 output current, i out (ma) 2 5 10 20 50 100 200 500 1k fig.3 dc current gain vs. output current dc current gain, h fe ta=100 25 -40 i o /i i =20 0.5 2 5 10 20 50 100 200 500 1 output current, i out (ma) 1 2 5 10 20 50 100 200 500 1000 output volt age, v out(o n) (mv) fig.4 output voltage vs. output current utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
